Microtronic Autohex II BMW WVCI HW4.0

Autohex II HW4 and all the features included in the standard BMW licensing functions plus a 3-core ISN reader

With this set, you can do the following:

• Read the old ISN in the BMW E series to find out:
• Read Long ISN (SK) on the following BMW E series Ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEVD174KW, MV1724, MEVD174KW, MV1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0,
• Read Long ISN (SK) on the following BMW F series Ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
• Read/Write long ISN (SK) on BMW E and F series on bench using factory mode. No need to open DME/DDE (only Autohex II can do this function)
• Read ISN from Tricore Ecus via boot mode.
• CAS1, CAS2, CAS3, CAS3+ read and write ISN and SK
• BMW E Series EGS ISN CAS Compliant
• BMW F series EGS 6HP and 8HP EWS reset
• BMW E and F coding series for all Ecus systems (Ecucoding is calculated from FA)
• Modify, backup and restore vehicle commands from LM, FRM, etc.
• Perform diagnostic and service functions of Autohex II (reading and clearing fault codes, data flow values, activation and reconditioning, …)
• Use BMW ISTA-D in Autohex II WVCI (BMW ISTA-D driver)
• Unlock BDC and FEM secret to be able to: change BDC and FEM VIN, change BDC and FEM ISN, reset mileage for BDC and FEM, make key for BDC and FEM.
• Read and write ISN for MSD85, MSD87, MSV90 in F series.

What you missed in this collection:

• BMW E Series, F Series, G Series Online Programming and Manual Coding (Can be ordered later)
• BMW E and F key programming (can be ordered later)

What did you get:

• Autohex II WVCI HW 4 Device
• BMW Software Standard License
• Boot Mode License ISN
• BMW ISTA/D Driver to Run Dealer Software
• 1 year technical support
• 1 year hardware warranty