DiagCar DAMBO Mini Tag Key Tool

DiagCar DAMBO Mini Tag Key Tool

DiagCar DAMBO Key Tool Description:

DiagCar Key Programming Tools
Product weight: 45 grams

DiagCar DAMBO Key Tool Specifications:

Manufacturer : DiagCar
the condition : new

DiagCar DAMBO Mini Tag Key Tool Accessories

• Features of DAMBO KEY TOOLQuick information about DAMBO

• Download BMW Dumbo Motorcycle Quick Guide and Options Description
• DAMBO KTM MotorcyclesQuick Guide and Options Description
• Ducati Dumbo Motorcycles
  Quick guide and description of options
•  To clone DAMBO TP
• DAMBO Virtual Slide List

•  For TOYOTA ID8A P1 AA 128bit Toyta/Lexus smart keys (ID8A) with p1=AA

Main workshop

• Detect, identify and clone transceivers –
• Review vehicle data and different allowed keys (such as PIN, VIN, FCCID, etc.) –
• Use different tools allowed for the discovered key (such as PIN Extracors, Unlocker, etc.)

Main production

• OEM transponder setup (learned to vehicle using PIN code) –
• Prepare your own proxy key using some private data (PIN, VIN, CS, immodata, etc.)

Transceiver reading and writing tools

• Read/write transmitter data (registers, extended memory, keys)
• Configure read/write response devices (access modes, locks, memory partition, etc.)
• Supports all permitted configurations and access modes.

Unloading tools

• Support memory dump files of various car modules and other binary data.
• Auto-detect file. Display allowed unit data (such as keys, PIN, part number, serial number and other data).
• Other software tools available:
• Correct the error
• Data editors for export
• Import data add
• Copy/remove keys – etc.

Remote frequency tester

• Bands: 312MHz, 315MHz, 434MHz, 868MHz, 902MHz.
• Modifications: FSK / ASK
• Automatic range detection
• Automatic frequency/power counter
• Place the remote control 20-100cm away from the device.
• Press any button on the remote control.
• The indicator being operated is the frequency.

Supports the program DAMBO KEY TOOL Hardware products MINITAG A wide range of specialized chips (virtual transceivers) are available on the secondary market.
It is suitable for simulating various types of car key transponders.
You can use special transponders to simulate an immobilizer key transponder, ready to start the car using specific software functions.

Special slides are usually used. To clone the transponder In most cases, transponder cloning takes less time and does not require a factory transponder or additional equipment. Additionally, you can also use custom transponders with any software options that require factory transponders, such as Transponder production or unloading tool .

Any software option that requires a factory transceiver allows the use of a suitable virtual chip from the aftermarket with the same ease as the original chip. In this case, you do not need to make any additional selections or prepare the chip in advance. The software will automatically detect the particular chip and configure it according to the required function.

Most of the transceivers are rewritable, allowing them to be reused as well as used for testing or training purposes.

List of supported virtual slides:

T5

The T5 transceiver is a universal chip for emulating many fixed code transceivers.

– Simulate fixed code response chips ID11/ID12/ID13/ID33
- Carbon type
- Rewritable

EH2

EH2 is a replicable electronic head with chip and battery. EH2 is used to clone Texas Fixed and Texas Crypto 4C/4D/4E transponder keys.

– Texas Holdem 4C Simulation
– Texas Crypto 4E (ID64) simulation
– Texas Crypto 4D Simulation (ID60 61 62 63 65 66 67 68 69 70)
– PCB based type – Battery operated.
- Rewritable

TBX 02

TPX02 is a special cloning chip used to clone 4D/4E Texas Crypto transponder keys.

– Texas Crypto 4E (ID64) simulation
– Texas Crypto 4D Simulation (ID60 61 62 63 65 66 67 68 69 70)
- Type of glass
- Rewritable

Most cloning tools can only use TPX2 once and cannot be reused after locking. Dambo Key Tool can reuse it multiple times.

LKB-02

LKP-02 is a special cloning chip used to clone 4C/4D/4E Texas Fixed and Texas Crypto transponder keys.

– Texas Holdem 4C Simulation
– Texas Crypto 4E (ID64) simulation
– Texas Crypto 4D Simulation (ID60 61 62 63 65 66 67 68 69 70)
- Carbon type
- Rewritable

LKB-04

LKP-04 is a special cloning chip used to clone Texas Crypto-3 (DST-AES) transponder keys.

– Texas Crypto-3 DST-AES (ID8A) simulation
- Carbon type
- Rewritable

In VDEXT 27A

VVDI XT27A is a virtual transponder chip that has the ability to convert to a wide range of automotive transponder chips.

– Simulating transceivers:
Fixed code (11 12 13)
TERRIS 4C
Texas Dst 4D (ID60 61 62 63 65 66 67 68 69 70 72G 82G 83)
Texas Dst 4E (ID64) Texas Dst AES (ID8A)
Megamos 8C
Megamos 48
Philips PCF7935 (ID33 40 41 42 43 44)
HITAG-2 PCF7936 (ID46)
HITAG-3 PCF7938 (ID47)
Hitachi Pro PCF7939P (ID49)
HITAG-AES PCF7939M (ID4A)
- Carbon type
- Rewritable

cn1
cn2

CN1, CN2 and YS-01 are special cloning chips used to clone 4C chips (for CN1) and 4D chips (for CN2).

– Texas Holdem 4C Simulation
– Texas Crypto 4D Simulation (ID60 61 62 63 65 66 67 68 69 70)
- Carbon type
- Rewritable

The software can switch the transceiver type from CN1 to CN2 and vice versa depending on the type required, so you can use any of these chips equally.

cn3

CN3 is a special cloning chip used to clone Hitag-2 transceivers.

– ID46 simulation
- Carbon type
- Rewritable

cn5
cn64

CN5 and CN64 are special cloning chips used to clone 4E chips (for CN64) and 4D/4D-80bit chips (for CN5).

– Texas Crypto 4E (ID64) simulation
– Texas Crypto 4D Simulation (ID60 61 62 63 65 66 67 68 69 70)
– Texas Crypto 4D-80bit (ID70 72G 83) simulation
- Carbon type
- Rewritable

The software can switch the transceiver type from CN5 to CN64 and vice versa depending on the type required, so you can use any of these chips equally.

cn6

CN6 is a special cloning chip used to clone Megamos Crypto transceivers.

– Megamos Crypto Simulation (ID48)
- Type of glass
- Rewritable

ID 46AS

ID46AS is a special cloning chip used to clone Hitag-2 transceivers.

– ID46 simulation
- Carbon type
- Rewritable

Key Tool It is an advanced tool for copying a wide range of transponders used in a variety of vehicle keys, such as:

Fixed code for Temic® / Megamos®

– Variety of vehicle keys with ID11, ID12, ID13 transponder chips.

Texas® Fixed Code 4C

– Variety of vehicle keys with ID4C transponder chips.

Megamos® Crypto 8C

– Ford/Mazda ID8C transponder keys.

Texas® Crypto 4D/4E

– Variety of vehicle keys with ID60 and ID64 transponder chips.
– Mitsubishi ID61, ID62 transponder keys.
– Ford/Mazda ID63 transponder keys.
– Suzuki ID65, ID66 transponder keys.
– Transponder keys for Toyota/Lexus ID67, ID68, ID70, ID70E.
– Transponder keys for Suzuki/Yamaha/Kawasaki bikes ID62, ID69.

Texas® Crypto-2 4D-80-bit

– Ford ID83 (ID6F-63) transponder keys.
– Kia/Hyundai ID6E(ID70) transponder keys.
– Toyota/Lexus G-chip transponder keys (ID6E, ID72G, ID67G)

Texas® Crypto-3 AES-128bit

– H-chip (ID8A) transponder keys for Toyota/Lexus.

NXP® Crypto Hitag-2

– Variety of vehicle keys with ID46 transponder chips.

Supports most vehicle transceivers, including encryption transceivers such as Texas® Crypto-2 80 bit and Texas® Crypto-3 128 bit, Fast copying that allows the user to clone keys quickly and easily. It is a simple step-by-step process that requires minimal user operations.

To produce a copy of the key, you must use a special chip to simulate the transponder of the immobilizer key. The program supports Key Tool A wide range of specialized chips (virtual transceivers) suitable for simulating different types of car key transceivers.

Despite the wide variety of supported clone transceivers, the user does not need to worry about choosing the right chip.
The software will automatically detect and configure a private chip according to the client key type.

Check “Support Guide for Special Chips for Emulating Transceivers” For a complete list of supported clone transceivers.

The Quick Clone function allows transponders to be cloned without having to be connected to the vehicle, making the process easier and more streamlined. The entire process takes less than five minutes on average. You can use the Quick Clone function after selecting the original key. Insert the original key into the device and perform Workshop->Select in the app. After selecting the transponder, a report will be displayed on the app screen. If the transponder allows cloning, the appropriate link will be available in the tool menu. To continue cloning, you must follow the appropriate link. After that, a cloning tool will open with a suggestion to bring an acceptable cloneable chip. Insert the cloneable transponder into the device and complete the cloning process.

To copy ID46 The vehicle key data collection must be performed at the moment the ignition is turned on. For this operation, the original key and a special device must be used – DK46

DK46 It is a special small wireless device that allows you to sniff the installation file data while exchanging data with the key. It does not require DK46 Power and save data until next use.

cloning ID46 Using the application Key Tool It is a simple step-by-step process that requires minimal user operations.

DiagCar DAMBO Key Tool Package Contains:

– DAMBO KEY TOOL
– DK46 device
– DK60-AA device
– USB connection cable
– 365 days license