GODIAG GT100 Pro Breakout Box ECU Tool Kit + BMW CAS4 CAS4+ FEM/BDC Test Platform

GODIAG GT100 Pro Breakout Box ECU Tool Kit + BMW CAS4 CAS4+ FEM/BDC Test Platform Used with AUTEL IM508 IM608 VVDI2 CGDI BMW

Product Description:

GODIAG Key Programming Tools and Diagnostic Tools
Product weight: 2000 grams

Specifications:

Manufacturer :GODIAG
the condition : new

GODIAG GT100+ Key Features

• 1 year warranty.
• Used with KESS V2 and Ktag
• ECU Connection + OBDII Protocol Detector + Electronic Current Monitor
• The cable can be extended using an optional custom adapter.
• Compatible with tools from LAUNCH, AUTEL, FOXWELL, XHORSE, VXDIAG, CGDI….
• Convert OBD1 diagnostic interface to standard OBD2 diagnostic interface
• Used with BMW-CAS4 adapter test platform to detect whether CAS4 key programming works perfectly or not.

GT100+ Pro vs GT100

1. The GT100+ adds an electronic current display.
2. GT100+ adds CANBUS protocol for communication
3. Reset device/immobilizer when all keys are lost

GODIAG GT100+ It is the latest test platform for OBDII protocol communication detection and ECU maintenance/diagnosis/programming/coding. After all keys are lost, the device and anti-theft system are forced to activate by short circuit.

It is GT100+ device Equipped with voltage and current display, it is convenient for maintenance engineers to judge the current working status of the electronic control unit.
Converts the car OBD2 interface to 16 pin for signal detection and electrical level conversion. Able to connect single or multiple modules to the car.
It is used with any diagnostic tool to help you know if the vehicle connection is good or not.
Supply power to the car when changing the battery to avoid vehicle control unit data loss, automatic lock, key remote control failure, and error light lighting.

GODIAG GT100+ Operation and Function Manual

By connecting the vehicle and diagnostic tool via OBDII, the LED indicator of Godiag GT100+ will indicate whether the OBDII diagnostic interface has good communication with the vehicle.

Monitor and display vehicle OBDII interface voltage in real time. If it is less than 11V, please stop diagnostic and programming to avoid vehicle unable to start/data loss/module lock.

Meaning of indicator GODIAG GT100+ :

It is used to check if the diagnostic/programming/coding tool is able to send communication signals.

ECU Connection: Single Unit Connection

Connected to one ECU, the GODIAG GT100+ is convenient for the user to perform diagnosis and programming of one unit.

GT100+ Program Key for VW, Porsche, Mitsubishi etc. with all keys lost – Activate the device module or immobilizer.

1. To program VW 4th/5th generation all keys lost (eg: A6L Touareg A4 Q5 A7 new), please use GT100+ to short the banana connector PIN 16—-PIN 1 to the dashboard light, then use the key programming tool to connect to the GT100+ female adapter to collect data. Some vehicles' dashboards will not light up, but data can also be collected, eg: A6L Q7.
2. To replace the Toyota ECU or to use some key programming software to program Toyota when all keys are lost, a short circuit between PIN13 and PIN4 is required.
3. To program Mitsubishi key with all keys lost or to set OBDII when all keys lost remote, please short circuit PIN1 and PIN4.
4. To program a Porsche Cayenne key with all keys lost or all remote keys lost, please short circuit PIN3 to PIN7.

Function of displaying voltage and current value

Connect the ECU to the test bench with banana connector or dedicated DB25 ECU interface, the Godiag GT100+ will display the voltage/current value.
The user can intuitively see the current status of the ECU. There is no current display or the actual displayed current is not consistent with the engineer's expected current, then you can immediately check whether the wiring is wrong, if the wiring is correct, he can judge that the ECU may be faulty, so there is no need to make a diagnostic call and can directly repair the ECU.

If it shows too much current, you can also determine if the cable is connected incorrectly or the ECU is broken.

GT100+ Pin 1, 9, 3, 11 12, 13, 8 [corresponding to the yellow banana connector on the device], This non-standard obd2 protocol interface may display CAN BUS or K-Line communication protocol. GT100+ can only display K-Line PWM VPW+ KWP 2000 protocol. GT100+ will display CANBUS K-Line Pwm Vpw+ KWP 2000 protocol communication.

You can quickly communicate with one ECU on the bench by connecting to the ECU diagnostic/programming tool. [This allows engineers or technicians to complete the task on the bench, and avoids the risk of losing data on other units when testing directly on the vehicle.]

GODIAG FEM BDC Test Platform for BMW

The Godiag FEM/BDC Programming Test Bench is a dedicated device developed for BMW locksmiths, service engineers and FEM/BDC programming engineers.

Godiag FEM test platform can program new key when all keys lost, new key can be added to BMW FEM BDC vehicle on the seat.

GODIAG BMW CAS & CAS4+ Test Platform

The Godiag CAS4/CAS4+ test platform is a custom device developed For BMW locksmiths, service engineers and CAS4 CAS4+ programming engineers.

1. Working with Godiag GT100 and xhorse vvdi 2 / bmw vvdi bim tool / Lonsdor k518 / Autel im608 etc, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, and can add new key and replace CAS4 / CAS4+ ECU.
2. Before reinstalling the CAS4 CAS4+ module into the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or if there is any fault.
3. It is used to read and backup data after pre-processing, and is used to replace CAS4/CAS4+ mounting unit (eg: replace dual-port CAS4 with triple-port mounting system with convenient access).
4. Before installing the CAS4/CAS4+ module back into the vehicle, it can be used to test whether the programmed key is synchronized with the CAS4/CAS4+.
5. Godiag CAS4 CAS4+ test platform can help expand the business scope of skilled engineers in CAS4/CAS4+ key programming.
   When the car owner loses the key, he can remove the CAS4 module and the corresponding ECU, then send it to the locksmith to program a new key, and he can also do synchronization test on the programmed key and CAS4/CAS4+.
6. Troubleshooting – When the key cannot start the vehicle, this test platform can be used to determine if the cause is the mismatch between the cas4 cas4+ and the key.
7. This test platform adopts OEM cas4 cas4+ dedicated quick connector, which makes the connection simpler, more convenient and reliable. It will not bend the contact pin of CAS4 CAS4+ module.

GODIAG FEM BDC Test Platform Package Contents:

1. 1pc × GT100+ Host
2. 1pc x 2 in 1 OBD Extension Cable
3. 1pc x Colorful Connection Cable
4. 1pc × 12V Power Supply
5. 1pc x 120ohm resistor
6. 6pcs x Banana Plug
7. 24pcs Wire Accessories Dupont Connector Pins 2.54mm
8. 1pc BMW CAS4 CAS4+ Test Platform
9. 1pc BMW FEM BDC Test Platform

suitability GODIAG FEM BDC Test Platform :

• BMW