ABRITES FN00f FCA Full package of special functions

ABRITES Fn00f FCA Full set of special functions

Product Description:

Activate the program from Abrites

The Abrites FN00f FCA Full Package contains all ABRITES special functions for FCA vehicles: FN015, FN021, FN022, FN023 and FN024.

FN015 It is intended for reading and updating the internal configuration memory of the ECU of Fiat/Lancia/Alfa/FCA (FIAT/CHRYSLER AUTOMOBILES) vehicles by OBD. It has the following functions:

• Read/Update ConfData by obd
• Calibration by obd
• Make a virgin by obd

(When it is not possible to operate by OBD, boot mode is required)

Supported units:
Bosch: EDC15C5 EURO2, EDC15C7 EURO3, ME7.3H4 (Boot Mode), ME7.3.1 (Boot Mode)
Marelli: IAW 4AF, IAW 4EF, IAW 59F, IAW 59M, IAW 5AF (HW30x, ST10F168), IAW 5AF (HW60x, ST10F269), IAW 5AM, IAW 5NF, IAW 5SF3/5SF8 (Kline), IAW 5SF3 (CAN), IAW MJD 9DF

Some supported models:
Alpha: 145 – 1.9 D, 146 – 1.9 D, 147 – 1.9 D, 16V; 1.9 JTD 8V, 156 – 1.9 JTD; 2.4 D, 166 – 2.4 D and others.
Fiat: Bravo – 1.9 GTD, Brava – 1.9 GTD, Doblo – 1.9 GTD, Ducato – 2.0 GTD; 2.3 JD; 3.8 JD, Maria – 1.9 JD; 2.4 JTD, Marengo – 1.9 JTD, Fiat Punto – 1.9 JTD, Palio – 1.9 JTD, Stilo – 1.9 JTD, Siena – 1.9 JTD, Scudo – 2.0 JTD and others.
Fiat: New Panda, Idea, Doblo, Punto, Grande Punto, Cinquecento (with 1.3 IAW MultiJet MJD 6JF)
LANCIA: K – 1.9 JTD, Lybra – 1.9 JTD, 2.4 JTD, Thesis – 2.4 JTD, Z – 1.9 JTD and others; Muse, Epsilon (with 1.3 IAW MultiJet MJD 6JF)

Allows FN021 By aligning the agent between the BCM and other modules in the vehicle. In case of replacing the BCM, it allows you to get the current vehicle configuration from the IPC. The FCA Proxi alignment tool is a premium solution that allows:

• Add/Remove Modules from CAN Configuration
• Vehicle Configuration – Customization Options (Enable and disable features such as start/stop system, rain sensors, transmission sensors, indicators, etc.)
• Various upgrade options
• Read/update and save agent alignment data to file

Supported models:
Alpha: Giulietta (940), Giulia (952), Stelvio (949)
Fiat: 500 (312), 500e (332) (new Fiat 500), 500L (330), 500X (334), Doblo (263), Ducato (250), Fiorino (225), Tipo (356), Viaggio (343)
Jeep: Renegade (520)
RAM: Promaster City (636)
For models not listed above, there is an “Other Models” option that will align Proxi to the car, but it will not allow you to customize the settings.

FN022 is a powerful authorization dedicated for PIN code reading, key programming and remote control for Fiat/Lancia/Alfa/FCA (FIAT CHRYSLER AUTOMOBILES) vehicles for mechanical keys and keyless access keys.

Highlights of the license:
Keyless key programming for newer FCA vehicles manufactured after 2020.

New 2020+ models added to the main programming!

• Alfa Romeo Giulia and Stelvio
• Jeep Renegade, Compass, Wrangler, Gladiator
• Fiat 500X
• Dodge Ram (DT)
• Fiat Qubo 2020+ and Fiorino 2020+
  Maserati Levante and Ghibli

Main functions:

• PIN reading and key programming
• Setting up transceivers/switches
• remote control programming
• BCM – Read configuration data and update PIN

Basic learning and remote programming by obdii

Transponder Maker by Dump – Prepare the transponder by dumping the BCM to be ready for key programming.

• Read/Update BCM for ConfData by obdii from:
• BCM Delphi (93C66) – Note: PIN code required!
• PCM Delphi (NEC 70F3237/70F3379,93C86)
• PCM Delphi (NEC 70F3556)
• BCM Delphi (NEC 70F3557)
• PCM Delphi (NEC 70F3632/70F3633) (until 2020)
• PCM Marelli (912DG128, 3K91D)
• PCM Marelli (9S12DG256, 1K79X)
• Billion cubic meters Marelli (NEC 70F3237/70F3378,95160)
• PCM Marelli (NEC 70F3633,95320)
• PCM Marelli (MB91465P, 95640)
• Billion cubic meters Siemens (9S12DG128)

In some vehicles, the safety gate may be present, in which case the CB019 cable set is required to perform the procedure. In cases of loss of all keys, the CB017 distribution box and the ZN051 ABRITES are also required.

FN023 allows Adapting used units not related to the immobilizer system in Alfa Romeo, Fiat, Jeep and Lancia vehicles. .

Main function:

• VIN sync and adaptation

FN023 is used To synchronize the VIN of modules, such as distronic, ABS, climate control and many more, in order to adapt them to the vehicle. Immobilizer modules such as BCM, ECU and RFH cannot be exchanged using this license.

Supported vehicles include:
(until 2020)

• Alfa Romeo:

Julia
Stelvio
Julieta

• pocket:

The Rebel
compass

• Fiat:

500
500 liters
500X
Panda 319 MK4 (3rd generation)
Doblo 263 (2nd Generation)
Fiorino/Qubo 255 (3rd generation)
Ducato 250 (3rd generation)

The FN024 license is a significant step forward in key programming for FCA vehicles and one of the unparalleled ABRITES solutions on the market. With the FN024, you can prepare and program Atmel type keys for FCA vehicles.

Jobs:

• PIN code reading and key programming
• Setting up transceivers/switches
• remote control programming

Supported vehicles:

• Fiat 500E
• Alfa Romeo Tonale
• alfa romeo giulia
• Alfa Romeo Stelvio
• Jeep Renegade
• Fiat 500X
  Dodge Hornet
• And all other models that use Atmel type switches.

The license is developed for ZN085 ABRITES RH850/V850 programmer and works seamlessly with it. The key programming process includes reading dump with ZN085 programmer, then preparing key with the help of ZN003 PROTAG programmer and finally, learning key via ABRITES Diagnostics for FCA Online. In order to connect to the car, CB012 is required.

In some cases, a ZN038 adapter and a CB019 cable may also be required (the software will inform you).

ZN003 Protag programmer is needed to perform key programming. AVDI interface with active AMS is required to use this kit.