Fortin EVO‐ONE Remote Starter and Gift (GSM – GPRS – GPS – Tracker)

Fortin EVO‐ONE Remote Starter and Gift (GSM – GPRS – GPS – Tracker)

Product Description:

thatFortin Keyless Entry and Engine Start System
This product weight: 1000 grams

Specifications:

Manufacturer :Fortin
condition :New

Fortin EVO-ONE Remote Start Engine, Security System and Data Interface

The EVO-ONE is an all-in-one data immobilizer, door lock, security system, and remote start interface. Compatible with all EVO-ALL T-belts and also providing new wide access to high-power T-belts, the EVO-ONE now sets the industry standard to a whole new level. It takes the ease of hassle-free installation to a whole new level. It uses a multi-module microcontroller and bus architecture that redefines the word Remote Starter. This module is much more powerful than the BCM of most entry-level vehicles. The EVO-ONE is a great, advanced module at an affordable cost.

FORTIN EVO-ONE works with:

• Flash Link Manager
• DCRYPTOR
• Radio frequency groups
• Remote Controls and GPS
• Sensors
• External stimuli

Features of Fortin Evo-One:

• 3 x Built-in LEDs for simplified programming and diagnostics.
• 1 x Saddle Parts Bag.
• Bi-directional data link port for data-to-data (RS-232) communication with compatible external devices such as smartphones and remote GPS units.
• 1 x EVO-ALL I/O modules for complete coverage of data and analog vehicle functions.
• The self-learning algorithm automatically detects the vehicle during programming and adjusts accordingly.

Fortin Evo-One Specifications:

• 5 x High power relay on board.
• 3 x CAN-Bus controllers.
• 3 x General purpose controllers (J1850, LIN, Class 2, encrypted key etc.).
• 1 x On-board relay (DPDT).
• 1 x Analog Controller 0-12VDC @ 20mV Steps (Traffic Lock, Parking Lights, MUX).
• 10 x Data I/O Controllers.
• 1 x Dual Zone Shock Sensor Input.
• 2 x Datalink RS232 ports.

Fortin EVO-ONE Parts Included:

• 1 x EVO-ONE Controller.
• 1 x Warning Sticker.
• 1 x Hood Pin Key.
• 1 x 20 Pin General Purpose Belt Clip.
• 1 x 6 Pin High Power Harness.
• 1 x 5-pin CAN-Bus harness.
• 1x 6 pin relay harness.

Fortin EVO-ONE Supported Vehicles:

7113 Supported Vehicles

CCURA GSM – GPRS – GPS – Tracker

1 Summary
This product works based on the existing GSM/GPRS network and GPS satellites, and can locate
And monitor any remote targets via SMS, APP and internet. It adopts the most advanced
Dual GPS and AGPS positioning technology.

2. Device Description

2.1) The front side of the device is towards the sky. When installing in a car, if
The windshield will be pasted with a heat-insulating metal layer or heating layer.
Reduce GPS reception signal and cause GPS operation disturbance.

(GPS tracker must be installed by professional staff)

2.2 Wire connection
2.2 Connect the device power cord as follows:
2.2.1 Red wire connects to the vehicle's positive power +
2.2.2 Black wire connects to the negative car power –
2.2.3 Yellow wire connects to yellow wire relay
2.2.4 Green wire connects to ACC wire
2.25 Thin red wire connects to door control circuit if positive
2.26 Thin black wire connects to door control circuit if negative
Knowing the type of door trigger, whether it is positive or negative trigger

2.3 Device connection diagram

Note: All LED lights will turn off after 5 minutes for best concealment.
Connect 12V-36V power supply

3. Main functions
· Quad-band GSM frequency.
· Real time tracking via SMS/GPRS.
· Recover the original password.
· Real-time audio monitoring.
· Over speed alarm.
· ACC anti-theft alarm
· SOS alarm.
· Built-in backup battery to realize power failure alarm.
· Cut off the car oil or electrical circuit (optional).
· Add door open alert.
· Add Vibation alert
· Add smart sleep mode and power saving

4. Notifications:
1. GPS tracking can be done outdoor.
2. Please make sure your GSM SIM card (2G GSM network or 2G GSM compatibility)
Network) Supports making calls, sending messages and GPRS network.
3.Please make sure your GSM SIM card has sufficient balance.
4.Please make sure your GSM card has opened and turned off call offers.
Transfer the call.
5. Please insert the GSM phone card correctly.
6. Do not assemble and disassemble the device at will.
5. In turn

5. Turn on the device.
Open the back cover, and insert the SIM card (slide side up) into the slot.
The indicator light lights up when a SIM card is inserted.
The device gets GPS location when there is GPS signal and gets LBS.
Location when there is no GPS signal.
The device automatically turns off when the SIM card is removed.

6. SMS Tracking (123456 is the default password)
6.1. Insert the SIM card, and take the device outside.
6.2. Tracking
Call the SIM card phone number in the tracker, and you will receive a link to the location on Google Maps.
After setting up the authorization number or sending a message “smslink123456” to the SIM card
Phone number in tracking.

6.3. Administrator number setting supports 5 pieces of administrator number (After admin
Set up the number, all SMS alerts will send to the administrator number.)
Command: admin123456 phone number (this phone number is yours)
The mobile phone number, not the SIM card number in the tracker.)
Reply: Moderator agrees
For example: admin123456 13800138000
When the unit is in over speed alarm, trigger the alarm and it will send an alert to the administrator.
Number (13800138000)
Cancel admin number:
Command: noadmin123456 13800138000
Reply: We regret it, okay?
6.4 Monitor
6.4.1 The default mode is “Tracker” (Tracker Mode).
6.4.2 Send SMS “screen + password” to the unit, then switch to “screen”
Mode. Then use your mobile phone to connect to the device's sim card, the unit will be selected automatically.
higher
6.4.3 Cancel Monitoring Send SMS “tracker+password” to the unit, then switch to
Tracker mode.
6.5 ACC operation alarm
6.5.1 This function is deactivated by default. Send “ACC+password” to the tracker, and
The tracker will send “ACC on+latitude & Longitude” to the authorized numbers when
Ignition detection is on; the tracker will send “ACC off + latitude & longitude” to
Numbers approved when ignition is off and ACC is off.
6.5.2 Send “noacc+password” to disable this function, and the tracker will reply

6.6 Oil and power system parts
6.6.1 Send the command “cut+password” to the tracker, and it will remain in a motionless state.
Until the next command is executed to resume, stop the vehicle at speed.
Less than 20 km/h.
6.6.2 Resumption of the oil and energy system
Send “CV + Password” to the tracker,

6.7 Power failure alarm
6.7.1. This function is activated by default. It will send alarm after extra power
discount

6.8 SOS Help
Long press the SOS button for 3 seconds, the tracker will send SMS
“SOS Help!+lat./long.” to all approved numbers

9 vibration alarm (built-in g-sensor)
Send “shock+password+space+level” to the unit (level 1 to 5.1 is
Highest sensitivity), when the sensor is triggered, it will send out a vibration transmission.
Alarm + Latitude and Longitude “,
6.9.1
6.9.2 Cancel: Send SMS “noshock+password”

7. Arm group
7.1.1 Send SMS command “arm + password” to the tracker. SMS command
The tracker will enter armed state, the user must stop the engine,
(ie ACC is lower voltage), and you will set the arm condition to fail if the motor
When it is turned on (high voltage ACC control unit), it will reply “Setup failed!” Please turn off ACC”

disarmament
7.1.2 Disarm via SMS
Send SMS command “disarm + password” to the tracker and SMS
This will put the tracker into disarm mode.

Arm Status Alerts
7.1.2 Door open alarm
The unit will send a text message “Door Alarm+lat/long” to the approved number.
Interval every 3 minutes when the car door is always open in arm position.
Close the car door or disable the car to stop this alarm.

7.1.3 Administrative Coordination Committee Warning
The unit will send a text message “ACC on+lat/long” to the authorized number in
Every 3 minutes interval when the car engine is always running
arm condition
Turn ACC off or on to stop this alarm.

7.2 Setting the overspeed alarm (Works only in continuous positioning mode.)
Setting up overspeed alarm:
Command: speed123456 70 (let's assume the speed is 70 km/h) Note: not less
60 km/h
Reply: Speed is ok
For example:
When the unit speed exceeds 70 km/h, it will send a message “Speed alarm!” to
Supervisor number.
Cancel overspeed alarm:
Command: nospeed123456
Reply: No speed ok
7.3. Move the alarm setting (only works in getting GPS signal, the range is
(200m radius)
Command: move123456
Message reply: Move OK
For example:
Cancel movement alert:
Command: nomove123456
Reply: Don't move ok

7.4 Setting the terminal (local) time (factory setting GMT 0)
Command: Timezone 123456 Local timezone
Reply: Time is right!
For example: timezone123456 1 timezone123456 -1 timezone123456 0
Time zone 123456 5 30
7.5 Resetting devices
Command: reset 123456
Reply: Reset OK
7.6 Change Password
Command: Password 123456 888888
Reply: Password OK
Note: 123456 is the old (default) password, 888888 is the new password, which is
Arabic numerals must be 6 digits long.

7.8 Smart sleep mode and power saving

7.8.1 Send “sleepin + password” 7.8.2 Cancel: Send “sleepout + password”, the tracker will reply “sleepout ok”,
The tracker will not sleep, GSM and GPS work all the time.
7.8.3 Switch GPRS to SMS mode (SMS mode means GPRS off)
Default mode is “GPRS”, send SMS “sms+password” to the tracker,
It will reply “SMS OK!” Enter SMS mode
Send SMS “gprs+password” to the tracker, it will reply “gprs ok!”
Enter GPRS mode
8. Explanation of parameters/codes in SMS
Lat:22.039124 lon:114.039124 Locate latitude and longitude
Values.
Spd:000 This indicates the speed at which the device is moving. The unit is km/h.
Time: 18/15/43 Real time tracking, default is Beijing time. You can
Set time zone by SMS command
Google link: Here is the link to a Google map showing the location of the site.
device.
352887077654321: Device IMEI number
Approval 2: LBS information was replied without GPS satellite signal.
smcc:27a4 1223: Real time LBS data.
Time: 08/00/00 Positioning time lbs.
IMEI:352887077654321
6.0 Start tracking online
sms1: adminip123456 www.12gps.net 10202 (set DNS and port)
sms2: APN name123456 Apn (APN name please request sim card
Company, for example tell you apn name is ABC, so send APN123456
ABC)
If you set the first step, the device will do one line in the panel, no need to set apn commands
If you need real-time tracking via the app or web platform, please see here.
Platform Group Card

Additional details:

Related Products

• CCURA GSM – GPRS – GPS – Tracker
• Fortin EVO-ONE Remote Start Engine, Security System and Data Interface